Use the “SITE SURVEY” form to help define the length of pipe and other materials you
will need for the installation of the PCS1.
You can also use the form when communicating with the factory. Send the completed form
in along with photos of the pool’s support system and attic access area along with your questions.
Or, if you chose to phone, fill out the form first and be prepared to discuss the installation issues.
The factory will provide limited technical assistance by either phone or letter based upon the
information supplied either verbally or in writing. These are only
technical recommendations
since the factory does not have full access to a complete site perspective and does not provide on-
site assistance. Responsibility for correct installation and application of the product rests solely
All questions are self explanatory. On page 4 of this section is a SKETCH pad which can
be used to provide simple drawing details of your installation. You can also use the backside of
the forms for additional comments and/or drawings. Some survey questions are marketing issues
designed to help us provide better service. Please call or write if you have questions about this site
For phone assistance, dial (763) 441-3440
1-3
4-6
7-9
10-12
13-15
16-18
19-21
22-24
25-27
28-30
31-33
34-36
37-39
40-42
43-45
46-48
49-51
52-54
55-57
58-60
61-63
64-66
67-69
70-72
73-75
76-78
79-81
82-84
85-87
88-90
91-93
94-96
97-99
100-102
103-105
106-108
109-111
112-114
115-117
118-120
121
